电子垃圾重金属污染及防治对策研究

随着信息产业的飞速发展,电子产品更新换代加速,电子垃圾飞速增长,电子垃圾中的重金属对环境造成了越来越严重的污染.本文回顾了广东贵屿与浙江台州两大电子垃圾回收拆解区重金属污染的现状,分析了电子产品原材料、加工工艺和电子垃圾不当回收导致重金属污染的原因,提出了依靠政策法规引导、借鉴国外先进经验、进行电子垃圾回收处理产业化发展的相应防治对策,以期能改善电子垃圾导致的重金属污染.     

吉林油田稠油热采污水处理絮凝剂实验研究＊

在含油污水水质分析的基础上,采用烧杯实验和分光光度法研究絮凝剂的絮凝效果。筛选出以无机絮凝剂硫酸铝与两性高分子聚合物CE-3090的复配体系,同时研究了影响絮凝效果的因素并探究了其影响机理。结果表明:在温度为40℃,pH为7.72,170 r/min时高速搅拌1 min,然后50 r/min低速搅拌5 min,硫酸铝的加量为90 mg/L、CE-3090的加量为0.5 mg/L,絮凝沉降30 min后其絮凝效果较好。实验证明:该复配处理剂处理含油污水后,含油量和杂质含量都达到了SY/T 5329-94《碎屑岩油藏注水水质推荐指标及分析方法》油田污水回注的要求。     

Distribution and transport characteristics of fine particulate matter in beijing with mobile lidar measurements from 2015 to 2018

Accurately quantifying the concentration and transport flux of atmospheric fine particulate matter (PM_2.5) is vital when attempting to thoroughly identify the pollution formation mechanism. In this study, the mobile lidar measurements in Beijing on heavily polluted days in December from 2015 to 2018 are presented. The lidar was mounted on a vehicle, which could perform measurements along designated routes. On the basis of mobile lidar measurements along closed circuits of the 6th Ring Road around Beijing, the spatial distribution and transport flux of PM_2.5 in Beijing were determined with information of wind field. In the spatial distribution, both the concentration and transport of PM_2.5 were revealed to be more significant in the southern section of Beijing. The regional transport layer at heights < 1.3 km plays an important role in pollution formation. The maximum transport flux reached 1600 μg/(m²*sec) on 11 December 2016. With the aerosol boundary layer height determined from the image edge detection (IED) method, the inter-annual variations of the aerosol boundary layer height (ABLH) were also analysed. The ABLH decreased from 0.73 to 0.46 km during the same heavy pollution period from 2015 to 2018. Increasingly adverse aerosol boundary layer (ABL) meteorological factors, including lower ABLH, light winds, temperature inversions, and accumulated moisture, have become necessary for pollution formation in Beijing.     

Chemical characterization and source identification of PM2.5 in Luoyang after the clean air actions

Luoyang is a typical heavy industrial city in China, with a coal-dominated energy structure and serious air pollution. Following the implementation of the clean air actions, the physicochemical characteristics and sources of PM_2.5 have changed. A comprehensive study of PM_2.5 was conducted from October 16, 2019 to January 23, 2020 to evaluate the effectiveness of previous control measures and further to provide theory basis for more effective policies in the future. Results showed that the aerosol pollution in Luoyang in autumn and winter is still serious with the average concentration of 91.1 μg/m³, although a large reduction (46.9%) since 2014. With the contribution of nitrate increased from 12.5% to 25.1% and sulfate decreased from 16.7% to 11.2%, aerosol pollution has changed from sulfate-dominate to nitrate-dominate. High NO₃⁻/SO₄²⁻ ratio and the increasing of NO₃⁻/SO₄²⁻ ratio with the aggravation of pollution indicating vehicle exhaust playing an increasingly important role in PM_2.5 pollution in Luoyang, especially in the haze processes. Secondary inorganic ions contributed significantly to the enhancement of PM_2.5 during the pollution period. The high value of Cl⁻/Na⁺ and EC concentration indicate coal combustion in Luoyang is still serious. The top three contributor sources were secondary inorganic aerosols (33.3%), coal combustion (13.6%), and industrial emissions (13.4%). Close-range transport from the western and northeastern directions were more important factors in air pollution in Luoyang during the sampling period. It is necessary to strengthen the control of coal combustion and reduce vehicle emissions in future policies.     

企业料场喷淋抑尘系统

针对某球团厂料场在堆、取料时产生的扬尘,采用先进的喷雾重力降尘技术和PLC控制技术,对料场进行定点、定时、定量喷淋,抑尘效果显著.     

Effects of particle size on the adsorption behavior and antifouling performance of magnetic resins

Environmental Science and Pollution Research - Adequately choosing the physicochemical characteristics of adsorbent is crucial in improving its adsorption performance. This work investigated the...     

In vitro biotransformation of PBDEs by root crude enzyme extracts: Potential role of nitrate reductase (NaR) and glutathione S-transferase (GST) in their debromination

In order to investigate the enzyme transformation of PBDEs and to track the key enzymes involved in PBDE degradation in plants, in vivo exposure of plants of ryegrass, pumpkin and maize and in vitro exposure of their root crude enzyme extracts to PBDEs were conducted. Degradation of PBDEs in the root crude enzyme solutions fit well with the first order kinetics (R² = 0.52–0.97, P < 0.05), and higher PBDEs degraded faster than the lower ones. PBDEs could be transformed to lower brominated PBDEs and hydroxylated-PBDEs by the root crude enzyme extracts with debromination as the main pathway which contributed over 90% of PBDE depletion. In vitro and in vivo exposure to PBDEs produced similar responses in root enzyme activities of which the nitroreductase (NaR) and glutathione-transferase (GST) activities decreased significantly, while the peroxidase, catalase and cytochrome P-450 activities had no significant changes. Furthermore, higher enzyme concentrations of NaR and GST led to higher PBDE debromination rates, and the time-dependent activities of NaR and GST in the root crude enzyme extracts were similar to the trends of PBDE depletion. All these results suggest that NaR and GST were the key enzymes responsible for PBDE degradation. This conclusion was further confirmed by the in vitro debromination of PBDEs with the commercial pure NaR and GST.     

Estimation and characterization of PCDD/Fs and dioxin-like PCBs from Chinese iron foundries

The iron foundry industry is considered to be a potential source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). This study investigated the emission factors and total emission amounts of PCDD/Fs and dioxin-like polychlorinated biphenyls (DL-PCBs) from iron foundries in China. The concentrations and the World Health Organization toxicity equivalents (WHO-TEQs) are presented and the congener profiles are discussed in this paper.In the present work, 26 fly ash samples were collected and tested to quantify the PCDD/Fs and DL-PCBs generated by 14 plants of different scales, and five stack gas samples were collected from two (named as EFG and LFG) of those plants. The emission levels of PCDD/Fs and DL-PCBs indicated that hot-air cupolas had lower emissions than cold-air cupolas. When iron ore lump and sinter were used as raw material, the emission factors were about 250 ng TEQ t⁻¹ of product. However, if the raw material was scrap, the emission factors varied owing to the different contents of organic materials in the raw materials. It was found that the mean WHO-TEQ values of PCDD/Fs and DL-PCBs were 144 and 34.2 pg Nm⁻³ in stack gas and 20.0 and 1.58 pg g⁻¹ in fly ash. In multiple tests, it was estimated that the mean emission factors of PCDD/Fs and DL-PCBs were 365 and 10.9 ng WHO-TEQ t⁻¹ released to residue and 2719 and 555 ng TEQ t⁻¹ released to air. The total emission amounts of PCDD/Fs and DL-PCBs from Chinese iron foundries with cupola furnaces released to residue and air were 16.8 and 146 g WHO-TEQ in 2008, respectively.     

A process integration approach to industrial water conservation: a case study for a Chinese steel plant

A systematic approach to optimizing water network has traditionally been utilized to exam and plan water conservation in industrial processes. In the present case study, water-pinch technology was used to analyze and optimize the water network of a steel plant near China's Zhangjiakou city. A system design was developed and a limiting constraint (Cl(-) concentration) was identified based on investigations of water quality then the minimum freshwater and wastewater targets were determined without considering water losses. The analysis was then extended by calculating the additional input of freshwater required to balance the actual water losses. A nearest-neighbor algorithm (NNA) was used to distribute the freshwater and recycled water among each of the plant's operations. The results showed that with some reconstruction of the water network, the flow rates of freshwater and wastewater could be decreased by 57.5% and 81.9%, respectively.     

含贯通节理岩体锚固界面应力分布规律分析∗

在拉拔条件下,对全长注浆锚杆在含贯通节理岩体中界面应力分布规律进行分析研究。修订了无节理岩体界面剪应力分布函数,确定了一定条件下修订系数的取值,定义了应力传递参数C,采用有限差分软件Flac3d分析了其影响因子c、φ、ψ、β的影响作用。确定了主影响因子锚固角β,并且在修订公式中加入了锚固角β因子。分析了不同锚固角度下浆-岩界面剪应力的分布规律。结果表明,在带肋钢筋肋间处产生应力集中现象,注浆体起到了均化作用。在拉拔条件下含贯通节理岩体主要在锚端与节理面附近发生应力集中现象。上下部岩体浆-岩界面剪应力呈双曲线形式分布。浆-岩界面剪应力随着锚固角β减小,呈先减小后增大趋势。意味着当锚杆锚固角度在60°附近时,对岩体的锚固效果最好。